Skip to Content
ScientiFIX LLC
ScientiFIX LLC
Our Services
About
About Us
Policy
Store
Contact
0
0
Book now
ScientiFIX LLC
ScientiFIX LLC
Our Services
About
About Us
Policy
Store
Contact
0
0
Book now
Our Services
Folder: About
Back
About Us
Policy
Store
Contact
Book now
Store Agilent X3500- TwissTorr 304 FS Turbomolecular Pump *w/ CONTROLLER* Guaranteed
Screen Shot 2024-11-17 at 6.03.51 PM.png Image 1 of 6
Screen Shot 2024-11-17 at 6.03.51 PM.png
Screen Shot 2024-11-17 at 6.04.51 PM.png Image 2 of 6
Screen Shot 2024-11-17 at 6.04.51 PM.png
Screen Shot 2024-11-17 at 6.04.39 PM.png Image 3 of 6
Screen Shot 2024-11-17 at 6.04.39 PM.png
Screen Shot 2024-11-17 at 6.04.25 PM.png Image 4 of 6
Screen Shot 2024-11-17 at 6.04.25 PM.png
Screen Shot 2024-11-17 at 6.04.16 PM.png Image 5 of 6
Screen Shot 2024-11-17 at 6.04.16 PM.png
Screen Shot 2024-11-17 at 6.04.05 PM.png Image 6 of 6
Screen Shot 2024-11-17 at 6.04.05 PM.png
Screen Shot 2024-11-17 at 6.03.51 PM.png
Screen Shot 2024-11-17 at 6.04.51 PM.png
Screen Shot 2024-11-17 at 6.04.39 PM.png
Screen Shot 2024-11-17 at 6.04.25 PM.png
Screen Shot 2024-11-17 at 6.04.16 PM.png
Screen Shot 2024-11-17 at 6.04.05 PM.png

Agilent X3500- TwissTorr 304 FS Turbomolecular Pump *w/ CONTROLLER* Guaranteed

$1,749.99

This Agilent/Varian TwisTorr 304 FS Turbomolecular Pump (Agilent no. X3500-64020, with controller ) is a reliable, gently used unit in like new condition. Manufactured in Italy, this specific model has an ISO-100 primary inlet flange, a KF40 split flow inlet, a KF25/NW25 outlet flange, a KF16 vent adapter, and is set up for water or air cooling.

However we are happy to reconfigure it to -64010/-64060/ or other specs for FREE on request. Simply specify whether you want a KF 16 or KF 24 inlet, a purge valve inlet or blanking plug, a vent valve inlet or blanking plug, etc.

Specs list maximum a pumping speed of 250L/sec, and an ultimate vacuum of better than 1x10^-10

The pump includes everything you need to get going immediately including a Varian 9698973M015 controller, along with a power cable, a serial to USB cable for use with Agilent's free A-Plus vacuum control and monitoring software, as well as a prefabricated interlock/Start/Soft Start connector which allows you to control the pump directly without the need for a PC straight out of the box. It has been fully tested and is running great (see photos). The pump has recently received a full overhaul including a cosmetic cleanup, ultrasonic cleaning of internal components, top bearing replacement, bottom bearing cleaning and relubrication, bearing isolation ring upgrade, and an o-ring regreasing/replacement. It is in excellent working condition - runs quiet, smooth, and cool with very low current draw, comes up to speed in well under 5 minutes, and pulls a very good vacuum. Our test setup is FAR from UHV, but even after only 15 minutes of operation (and after days of sitting at atmospheric pressure), it passed 10^-7 mbar with no issue and was still dropping at the end of the test. All in all, this is a very nice and happy pump in beautiful condition that is sure to give you years of excellent service.

Ships FREE anywhere in the US, and is guaranteed against DOA and defect. We offer a 15 day test period following delivery to ensure it is working as advertised.

This is the BEST DEAL ANYWHERE for a fully overhauled, like new, guaranteed Agilent TwisTorr 304 FS in spectacular running condition WITH controller so don't miss out! Order now!

To order pump ONLY without controller or accessories, contact us

Add To Cart

This Agilent/Varian TwisTorr 304 FS Turbomolecular Pump (Agilent no. X3500-64020, with controller ) is a reliable, gently used unit in like new condition. Manufactured in Italy, this specific model has an ISO-100 primary inlet flange, a KF40 split flow inlet, a KF25/NW25 outlet flange, a KF16 vent adapter, and is set up for water or air cooling.

However we are happy to reconfigure it to -64010/-64060/ or other specs for FREE on request. Simply specify whether you want a KF 16 or KF 24 inlet, a purge valve inlet or blanking plug, a vent valve inlet or blanking plug, etc.

Specs list maximum a pumping speed of 250L/sec, and an ultimate vacuum of better than 1x10^-10

The pump includes everything you need to get going immediately including a Varian 9698973M015 controller, along with a power cable, a serial to USB cable for use with Agilent's free A-Plus vacuum control and monitoring software, as well as a prefabricated interlock/Start/Soft Start connector which allows you to control the pump directly without the need for a PC straight out of the box. It has been fully tested and is running great (see photos). The pump has recently received a full overhaul including a cosmetic cleanup, ultrasonic cleaning of internal components, top bearing replacement, bottom bearing cleaning and relubrication, bearing isolation ring upgrade, and an o-ring regreasing/replacement. It is in excellent working condition - runs quiet, smooth, and cool with very low current draw, comes up to speed in well under 5 minutes, and pulls a very good vacuum. Our test setup is FAR from UHV, but even after only 15 minutes of operation (and after days of sitting at atmospheric pressure), it passed 10^-7 mbar with no issue and was still dropping at the end of the test. All in all, this is a very nice and happy pump in beautiful condition that is sure to give you years of excellent service.

Ships FREE anywhere in the US, and is guaranteed against DOA and defect. We offer a 15 day test period following delivery to ensure it is working as advertised.

This is the BEST DEAL ANYWHERE for a fully overhauled, like new, guaranteed Agilent TwisTorr 304 FS in spectacular running condition WITH controller so don't miss out! Order now!

To order pump ONLY without controller or accessories, contact us

This Agilent/Varian TwisTorr 304 FS Turbomolecular Pump (Agilent no. X3500-64020, with controller ) is a reliable, gently used unit in like new condition. Manufactured in Italy, this specific model has an ISO-100 primary inlet flange, a KF40 split flow inlet, a KF25/NW25 outlet flange, a KF16 vent adapter, and is set up for water or air cooling.

However we are happy to reconfigure it to -64010/-64060/ or other specs for FREE on request. Simply specify whether you want a KF 16 or KF 24 inlet, a purge valve inlet or blanking plug, a vent valve inlet or blanking plug, etc.

Specs list maximum a pumping speed of 250L/sec, and an ultimate vacuum of better than 1x10^-10

The pump includes everything you need to get going immediately including a Varian 9698973M015 controller, along with a power cable, a serial to USB cable for use with Agilent's free A-Plus vacuum control and monitoring software, as well as a prefabricated interlock/Start/Soft Start connector which allows you to control the pump directly without the need for a PC straight out of the box. It has been fully tested and is running great (see photos). The pump has recently received a full overhaul including a cosmetic cleanup, ultrasonic cleaning of internal components, top bearing replacement, bottom bearing cleaning and relubrication, bearing isolation ring upgrade, and an o-ring regreasing/replacement. It is in excellent working condition - runs quiet, smooth, and cool with very low current draw, comes up to speed in well under 5 minutes, and pulls a very good vacuum. Our test setup is FAR from UHV, but even after only 15 minutes of operation (and after days of sitting at atmospheric pressure), it passed 10^-7 mbar with no issue and was still dropping at the end of the test. All in all, this is a very nice and happy pump in beautiful condition that is sure to give you years of excellent service.

Ships FREE anywhere in the US, and is guaranteed against DOA and defect. We offer a 15 day test period following delivery to ensure it is working as advertised.

This is the BEST DEAL ANYWHERE for a fully overhauled, like new, guaranteed Agilent TwisTorr 304 FS in spectacular running condition WITH controller so don't miss out! Order now!

To order pump ONLY without controller or accessories, contact us

Location

86 Storrs Road Suite B, #1084, Willimantic, CT 06226

Contact

service@scientifixllc.com (475) 343-4949   

ScientiFIX llc is an independent service provider - we are not an authorized service provider and are not associated with/representatives of the brands listed above. If your machine is still under warranty, we recommend you contact the manufacturer for service as independent service may void the warranty, and often any repairs will be free! However, if you have received an outrageous quote, or if your device is out-of-warranty, or no longer manufactured, serviced, and/or supported by the OEM, ScientiFIX is the best choice around for the professional, high quality, and cost-effective service and repair.